Bihis-Maala Basics

Total Sulfur and Carbon Determination in Cement and Raw Materials Utilizing the LECO SC832 Series of Instrumentation
2021-09-29 22:00 - 23:00 (Asia/Shanghai)
This webinar will review the application of the LECO SC832 family for the determination of sulfur and carbon in a wide variety of construction materials. Sample types covered in this presentation include cement, fly ash and ore materials. In addition, the basic operating principles will be covered as well as software features that can be used to simplify the analysis and reporting of results.
Wednesday, September 29, 2021 | 10 AM EDT | Presented by Lloyd Allen, Ph.D., Director Technical Services Laboratory
REGISTER HERE

HERZOG: Sample Preparation in the Foundry Industry (9PM Schedule)
2021-07-15 21:00 - 22:00 (Asia/Shanghai)
Interested to join? Email us at sales@bmbasics.com so that we can send you an invitation to the event.

HERZOG: Sample Preparation in the Foundry Industry (2PM Schedule)
2021-07-15 14:00 - 15:00 (Asia/Shanghai)

MECMESIN: Medical Devices – Syringe & Needle Testing Fundamentals
2021-06-30 01:00 - 02:00 (Asia/Shanghai)
Vial sealing is a critical step in the process of ‘fill and finish’ operations for vaccines and medications, as it defines the seal quality of the final product, ensuring sterility and preventing leakage. The final strength test associated with the vial involves characterizing the force required for a hypodermic syringe needle to pass through the elastomeric closure in accordance with ISO 8362-7.
Plastic single use manual syringes require the evaluation of the force profile associated with expelling fluid from the syringe barrel. The most common test is the breakaway and glide force measurement. Breakaway force measures the initial peak force required to begin plunger movement while glide force is the average force required to continue depressing the plunger (ISO 7886-1 Annex E)
In this webinar you’ll learn an overview of the standards associated with force testing needle and syringes, calculating penetration force, and syringe plunger force, setting up actuation tests, and establishing pass/fail criteria.
What You’ll Learn:

General Overview of the Needle Penetration Test
Calculating the needle penetration force
Setting up a Syringe Actuation Tests
Calculating the peak and average syringe plunger force
Establishing Pass/Fail Criteria

Who should attend?
Manufacturing, Production and Quality Managers and Engineers involved in:

Pharmaceuticals
Medical Device

To join, click here.

HERZOG: Principles of Sampling - Every Preparation Step Matters
2021-06-17 21:00 - 21:45, 2021-06-17 14:00 - 14:45 (Asia/Shanghai)
If you are interested to join, please email us at sales@bmbasics.com. We will send you a calendar invite with links to the webinar.

MECMESIN: T-Peel (Adhesion Strength) Testing
2021-06-17 01:00 - 02:00 (Asia/Shanghai)
This webinar will focus on the most common approach to measuring the adhesion strength of two materials bonded together with an adherent. Commonly known as the T-Peel Test, this type of testing can be found in industries like packaging, automotive, leather and upholstery, food, and beverage and many more.
This test is a quick, simple, and repeatable method when establishing quality or safety standards in adhesion strength testing. We’ll be discussing the benefits of T-Peel tests over other adhesion test types as well as a live demonstration of pass/fail criteria.
What You’ll Learn :

The importance of Adhesion strength testing
Industries where adhesion testing is critical
Best methods of T-Peel Testing (Manual, Motorized or Automated)
Selection the best grips and fixtures
Factors that affect consistent and repeatable testing
Capturing and analyzing test data

Who should attend:
Manufacturing, Production and Quality Managers and Engineers involved in:

Pharmaceutical and Medical Device
Food & Beverage
Electrical and Mechanical Assembly
Packaging
Leather and Upholstery
Glue and Adhesives

To join, click here

MECMESIN: Introduction to Consumer Packaging Testing
2021-06-16 01:00 (Asia/Shanghai)
Damaged packaging can not only cost money but also impact brand perception. Consumers are less likely to purchase a product with damaged packaging, or if their product arrives damaged from poor packaging during the shipping and transport process. Additionally, many brands want to maximize cost savings for their packaging by minimizing excess material and “over design” while keeping the products protected in transit. Packaging testing will help reduce packaging costs by identifying proper protection levels and eliminating unnecessary or excessive packaging materials.
In this webinar, we’ll discuss the benefits of testing, when to test and what can be tested. We’ll then look to real-world packaging applications, such as: top load, opening torque, peel and tear, wear and scratch, box crush, pump actuation, and more. Finally, we will review the types and advantages of the testing equipment that is used in consumer packaging testing.
What we’ll discuss:

What, Why, and When to test (R&D, Production, QC, etc.)?
Typical Packaging Applications:

Plastic Bottles and Containers; Caps, Corks, and Stoppers; Seals and Seams; Labels and Wrappers; Cartons and Card; Dispensing Mechanisms

Testing Equipment: Force, Torque & Wear Abrasion

Who should attend?
Manufacturing, Production and Quality Managers and Engineers involved in:
‒ Packaging industry (closures, containers, jars, bottles, tubes … plastic and metal)
‒ Food and Beverage, Pharmaceutical, Medical Device, Cosmetics, etc.
To register, click here

Optimization of Steel Analysis (2nd session)
2021-05-12 21:00 - 22:00 (Asia/Shanghai)
If you would like to join the webinar, please email us at sales@bmbasics.com. We will forward you the invitation to the webinar.

Optimization of steel analysis
2021-05-12 14:00 - 15:00 (Asia/Shanghai)

StandardLabs: Non-Ferrous and Cement Industry
2021-02-25 15:00 - 16:00 (Asia/Shanghai)
Please send the following details to sales@bmbasics.com and we will have Herzog, our principal, send you an invite!
Name:
Company:
Designation/Position:
Email:
ContactNumber:

StandardLabs: Steel and Foundry Industry
2021-02-23 15:00 - 16:00 (Asia/Shanghai)

PrepMaster Analytics: Sensory data for advanced quality control in steel and powder sample preparation for OES or XRF analysis
2021-02-18 15:00 - 16:00 (Asia/Shanghai)
Interested to Join? Please email us at sales@bmbasics.com and we will forward you an email invite.

Thermo Scientific Webinar: XRF/XRD
2021-02-03 15:00 - 16:00 UTC
